Forum dedicated to all the news, info, and happenings of all things radio controlled in the 518 area code.


Mixture Screws


Posts : 1
Points : 29703
Reputation : 0
Join date : 2011-04-05
Age : 29
Location : Hudson Falls

Mixture Screws Empty Mixture Screws

Post  MacDuff413 on Thu Apr 07, 2011 3:02 pm

I need help getting my Revo 3.3 Nitro setup better. Anyone near Hudson Falls Have any suggestions on how many turns on idle and how many turns on throttle screw. Seems to be overheating and ive tried to spin it all different ways. Any suggestions please post. Also please specify on if i turn the screw from the passenger side of the vehicle or on drivers side. Im new at this and need a little help. Thanks
Robs Extreme rc
Robs Extreme rc

Posts : 162
Points : 33141
Reputation : 2
Join date : 2010-05-25
Age : 47
Location : Gansevoort / Ft Edward

Mixture Screws Empty Re: Mixture Screws

Post  Robs Extreme rc on Thu Apr 07, 2011 4:39 pm

Thread the hi speed needle completely in then turn it out 4 turns. As far as the low speed they are set at the factory. If you moved it set it back to flush with the throttle arm. Then adjust idle accordingly.

    Current date/time is Thu May 23, 2019 4:04 pm